Hi Larry --

One of my thoughts is to set up two Linux boxes, one of which would convert
serial to TCP/IP and the other TCP/IP to serial.  The first would sit next
to the SDRservr machine and the second next to the WinSDR machine.  This
would allow the communication to go over TCP/IP (ethernet) instead of the
serial line.  The goal is to take advantage of ethernet (or wireless) and
all its advantages over serial.

If you don't mind sharing... are you using a packet-based exchange or
streaming between the two WinSDR systems?

Karl


--On Friday, March 07, 2003 02:11 -0800 Larry Cochrane
 wrote:

> Hi Karl,
> 
> I tried this a few years ago. The DOS TCP/IP stack (Wattcp) disabled
> interrupts for too long of a time. This caused SDR to loose time every
> time a packet was sent.
> 
> Yesterday I was able to get one WinSDR system to send data to another
> WinSDR system using TCP/IP. It still needs a lot of work, so it will be a
> week or so before I have a new release ready for beta testing.
> 
> Regards,
> Larry Cochrane
> Redwood City, PSN
> 
> ----- Original Message -----
> From: "Karl Cunningham" 
> To: 
> Sent: Thursday, March 06, 2003 8:31 PM
> Subject: Re: New WinQuake and WinPlotGPS releases
> 
> 
>> Larry --
>> 
>> Is there a possibility of getting SDRservr to interface with WinSDR over
>> TCP/IP rather than the serial link?  I know SDRservr runs in DOS, which
>> is not very TCP/IP friendly.  Just thought I'd ask.
>> 
>> Karl Cunningham
>> 
>> 
>> 
>> --On Monday, March 03, 2003 20:29 -0800 Larry Cochrane
>>  wrote:
>> 
>> > WinPlotGPS;
>> > The program can now act as a TCP/IP GPS data server or client. I added
>> > this feature because I thought it would be "cool" to do it. I'm not
>> > sure how practical this new feature is, but with it you can send the
>> > data
> from
>> > the GPS receiver over the Internet (or local LAN) to another copy of
>> > WinPlotGPS. See the WinPlotGPS documentation for more information. I
> hope
>> > to do the same type of thing to my WinSDR datalogger. This way WinSDR
>> > users can remotely monitor their system using a TCP/IP connection.
>> 
>> __________________________________________________________
>> 
>> Public Seismic Network Mailing List (PSN-L)
>> 
>> To leave this list email PSN-L-REQUEST@.............. with
>> the body of the message (first line only): unsubscribe
>> See http://www.seismicnet.com/maillist.html for more information.
>> 
> 
> 
> __________________________________________________________
> 
> Public Seismic Network Mailing List (PSN-L)
> 
> To leave this list email PSN-L-REQUEST@.............. with 
> the body of the message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information.


__________________________________________________________

Public Seismic Network Mailing List (PSN-L)