PSN-L Email List Message

Subject: Re: Long Frequency noise?
From: "Dale Hardy" photon1@...........
Date: Sat, 26 Dec 2009 10:26:15 +1100


Hi Ted,
can you send me the files to have a look at please, also do you have any =
electronics inside the seismometer enclosures which may be adding =
convective heating and turbulence ?
thanks
Dale
  ----- Original Message -----=20
  From: Ted Channel=20
  To: psn=20
  Sent: Thursday, December 24, 2009 12:59 PM
  Subject: Long Frequency noise?


  Hi Folks,  I just recorded the 6.3M Primor'ye Russia,  on three =
sensors, a Lehman, a Vertical and a new horz I call ch 2.

  The Ch 2 sensor is new, and has a period of 22 second, horz pendulum =
like a Lehman.   This new sensor has always had (long period noise)?  =
FFT...... This was the first earthquake I have received since I =
installed it.   I normally filter 1 for low pass, .05 for high =
pass................This time I had to use 1 for low pass and .5 for =
high pass, to clean it up.

  I can send all three .psn files, all unfiltered, if you think you can =
tell me what is causing the noise.    I won't try to go into great =
detail here.   All three sensor recorded it clearly buy something is not =
right.








Hi Ted,
can you send me the files to have a = look at please,=20 also do you have any electronics inside the seismometer enclosures which = may be=20 adding convective heating and turbulence ?
thanks
Dale
----- Original Message -----
From:=20 Ted=20 Channel
To: psn
Sent: Thursday, December 24, = 2009 12:59=20 PM
Subject: Long Frequency = noise?

Hi Folks,  I just recorded the = 6.3M=20 Primor'ye Russia,  on three sensors, a Lehman, a Vertical and a = new horz=20 I call ch 2.
 
The Ch 2 sensor is new, and has a = period of 22=20 second, horz pendulum like a Lehman.   This new sensor has = always=20 had (long period noise)?  FFT...... This was the first = earthquake I=20 have received since I installed it.   I normally filter 1 = for low=20 pass, .05 for high pass................This time I had to use 1 for = low pass=20 and .5 for high pass, to clean it up.
 
I can send all three .psn files, all = unfiltered,=20 if you think you can tell me what is causing the = noise.    I=20 won't try to go into great detail here.   All three sensor = recorded=20 it clearly buy something is not right.
 
Thanks, = Ted

[ Top ] [ Back ] [ Home Page ]