Hi folks,  I think I have a defective DataQ194.    I am trying to obtain =
another 194, to swap out, to confirm this.   In the mean while, it has =
been suggest to try a different channel on the DataQ which has channels =
1-4.

My question is how to get AmaSeis to view channel 2 of DataQ?    I have =
no problem with AmaSeis seeing ch 1, on com port 1.   But when I change =
the input going into DataQ from ch 1 to ch 2, I see nothing in AmaSeis.

Let's assume, I have everything connected and operating fine, with ch 1 =
in dataQ, and AmaSeis see the data and displays it normally.

Now I change the input cable in the dataq from ch 1 to ch 2.    What do =
I do next to get AmaSeis to see the trace?

Perhaps I do nothing different in AmaSeis, and the reason I don't see =
the trace in AmaSeis is the dataq is defective?

I called Dataq service, and they seem to think it could be defective, so =
I will swap it out when I get another.   But if I can get a different ch =
to appear in AmaSeis I will check all four channels.








Hi folks,  I think I have a =
defective=20
DataQ194.    I am trying to obtain another 194, to swap =
out, to=20
confirm this.   In the mean while, it has been suggest to try =
a=20
different channel on the DataQ which has channels 1-4.
 
My question is how to get AmaSeis to =
view channel 2=20
of DataQ?    I have no problem with AmaSeis seeing ch 1, =
on com=20
port 1.   But when I change the input going into DataQ from ch =
1 to ch=20
2, I see nothing in AmaSeis.
 
Let's assume, I have everything =
connected and=20
operating fine, with ch 1 in dataQ, and AmaSeis see the data and =
displays it=20
normally.
 
Now I change the input cable in the =
dataq from ch 1=20
to ch 2.    What do I do next to get AmaSeis to see the=20
trace?
 
Perhaps I do nothing different in =
AmaSeis, and the=20
reason I don't see the trace in AmaSeis is the dataq is =
defective?
 
I called Dataq service, and they seem =
to think it=20
could be defective, so I will swap it out when I get =
another.   But if=20
I can get a different ch to appear in AmaSeis I will check all four=20
channels.
 
Thanks, Ted