Hi Ted
As far as I know Amaseis will only record CH1, do as Bob mentioned, use
DataQ for extra channels, or use Bob's software.
Regards
Dale

-----Original Message-----
From: psn-l-request@.............. [mailto:psn-l-request@............... On
Behalf Of Ted Channel
Sent: Saturday, 29 May 2010 1:39 AM
To: psn-l@..............
Subject: Re: AmaSeis and DataQ

Hi Robert,  Yes............I can see channel 1-4 in the dataq software 
viewer.    When I make the cable change from ch 1 to ch 2 in dataq ch 2 is 
visible and recording.   Now how can I make it visible in AmaSeis?

Thanks, Ted




----- Original Message ----- 
From: "Robert McClure" 
To: 
Sent: Friday, May 28, 2010 8:52 AM
Subject: Re: AmaSeis and DataQ


> Have you tried recording with the regular Dataq software yet? That
> should be your next move.
>
> On 5/28/10, Ted Channel  wrote:
>> Hi folks,  I think I have a defective DataQ194.    I am trying to obtain
>> another 194, to swap out, to confirm this.   In the mean while, it has 
>> been
>> suggest to try a different channel on the DataQ which has channels 1-4.
>>
>> My question is how to get AmaSeis to view channel 2 of DataQ?    I have 
>> no
>> problem with AmaSeis seeing ch 1, on com port 1.   But when I change the
>> input going into DataQ from ch 1 to ch 2, I see nothing in AmaSeis.
>>
>> Let's assume, I have everything connected and operating fine, with ch 1 
>> in
>> dataQ, and AmaSeis see the data and displays it normally.
>>
>> Now I change the input cable in the dataq from ch 1 to ch 2.    What do I

>> do
>> next to get AmaSeis to see the trace?
>>
>> Perhaps I do nothing different in AmaSeis, and the reason I don't see the
>> trace in AmaSeis is the dataq is defective?
>>
>> I called Dataq service, and they seem to think it could be defective, so 
>> I
>> will swap it out when I get another.   But if I can get a different ch to
>> appear in AmaSeis I will check all four channels.
>>
>> Thanks, Ted
> __________________________________________________________
>
> Public Seismic Network Mailing List (PSN-L)
>
> To leave this list email PSN-L-REQUEST@.............. with
> the body of the message (first line only): unsubscribe
> See http://www.seismicnet.com/maillist.html for more information. 

__________________________________________________________

Public Seismic Network Mailing List (PSN-L)


__________________________________________________________

Public Seismic Network Mailing List (PSN-L)